Loading Events

« All Events

  • This event has passed.

Anchor Bolt Installation and Testing London – ABI09111

November 9, 2021 - November 10, 2021

£540.00

This course if for technicians to install BS EN795 Type A anchor bolts and be able to certificate and test

  • Assessment Method: Written and practical
  • Course Duration: 2 Days
  • Trainer to Candidate Ratio: 1:6
  • Revalidation Period: Certification valid for 3 years
  • Certification: PDF copy of Certificate

Syllabus Content
• BS EN795 – Personal Protection against Falls from height – Type A Anchor devices.
• BS 7883 – Code of Practice for design, selection, installation, use and maintenance of anchor devices
• BS 8610 – Personal Fall Protection Equipment – Specification
• IRATA ICOP – Annex F - Safety considerations when installing or placing anchor devices for use in rope access
• Working at Height Regulations
• Lifting Operations and Lifting Equipment Regulations
• Selection and types of anchor devices
• Method of fixing – Resin & Mechanical
• Location of Anchors
• Structure Requirements
• Testing and Equipment
• Anchor Bolt Identification Tag information
• Anchor Bolt certification and information to be supplied to the client
• Equipment used for installation and testing
• Use of PPE whilst installing anchors

    Practical Content
    • Understand and use equipment for the installation of anchors.
    • Understand and carry out structural tests of the base material.
    • Understand the importance of correct installation of anchors in terms of drilling and preparing the holes for the anchor inserts.
    • Carry out an installation of the following anchor systems.
              o Resin inserts and anchors
              o Mechanical Anchors
              o Through type anchor systems
              o Steel fixed anchor systems
              o Roof anchor systems
    • Carry out a thorough examination, inspection and testing of the above anchor systems.
    • Carry out a pull test after installation.
    • Understand the installation of anchor posts and davit arms, bases, and inspection/testing.
    • Understand and use a Hydrajaws pull testing device with load bridge.
    • Understand and use a load cell for pull testing / weight loading of anchor devices.

           

          • Minimum Age of 18 years
          • Candidates need to be physically fit and free from any disability or medical condition that may prevent them from working safely
          • A self-certified statement of reasonable fitness
          • MCL-UK Training Manual

            All the equipment for training will be provided in the course cost.

          Tickets

          The numbers below include tickets for this event already in your cart. Clicking "Get Tickets" will allow you to edit any existing attendee information as well as change ticket quantities.
          Tickets are no longer available

          Details

          Start:
          November 9, 2021
          End:
          November 10, 2021
          Cost:
          £540.00
          Event Category:

          Venue

          MCL London Training Centre
          Unit T04, Leyton Industrial Village
          London, E10 7QP
          + Google Map